احتياطات صيانة جرار ALLIAN

احتياطات صيانة جرار ALLIAN

1. [AR translation unavailable] Rust Prevention Measures[AR translation unavailable] Park the tractor in a garage as much as possible to protect it from wind, sunlight, rain, and snow erosion.
2. [AR translation unavailable] Oil & Filter Cleaning and Replacement[AR translation unavailable] Timely clean and replace engine oil & filter, gearbox gear oil, lifter hydraulic oil & filter. Do not mix oils of different grades.
3. [AR translation unavailable] Belt and Paint Maintenance[AR translation unavailable] Loosen the engine fan belt, and remove it if necessary. Wrap and store the belt separately, then spray anti-rust agent into the pulley grooves. Repaint any parts of the ALLIAN tractor with chipped paint.
4. [AR translation unavailable] Pipe Sealing[AR translation unavailable] Seal unclosed engine pipes (such as intake and exhaust ports) with protective materials (canvas, tarpaulin, or oilpaper) to prevent foreign objects, dust, and moisture from entering.
5. [AR translation unavailable] Control Handle Positioning[AR translation unavailable] Place all control handles in the neutral position (including electrical system switches and parking brakes). Align the front wheels and lower the suspension rods to the lowest position.
6. [AR translation unavailable] Cooling System Care[AR translation unavailable] For users with radiator water tanks, drain the cooling water immediately after use to avoid engine block cracking due to freezing.
7. [AR translation unavailable] Fuel Tank Cleaning[AR translation unavailable] Regularly clean the fuel tank: park the tractor on a level ground, turn off the engine, remove the drain plug under the fuel tank, and drain the sediments at the bottom.
8. [AR translation unavailable] Battery Maintenance[AR translation unavailable] Check the battery capacity regularly. Inspect the battery voltage monthly—charge it promptly if the voltage is below 12.5V to prevent difficult charging and reduced lifespan after long-term storage. Use the battery’s indicator eye to check charging status and quality: green indicates qualified (sufficient power), black means discharged, and white indicates battery damage. Remove the battery for storage in a ventilated, dry, and fire-free place if unused for a long time; turn off the main power switch for short-term storage.
9. [AR translation unavailable] Lubrication Grease Replacement[AR translation unavailable] According to the user manual, remove old lubrication grease from lubrication points and replace it with new grease.